RXCLKSEL=SELECT_THE_RX_FRACTI
I2S Receive mode control.
| RXCLKSEL | Clock source selection for the receive bit clock divider. 0 (SELECT_THE_RX_FRACTI): Select the RX fractional rate divider clock output as the source 2 (SELECT_THE_TX_MCLK_S): Select the TX_MCLK signal as the RX_MCLK clock source |
| RX4PIN | Receive 4-pin mode selection. When 1, enables 4-pin mode. |
| RXMCENA | Enable for the RX_MCLK output. When 0, output of RX_MCLK is not enabled. When 1, output of RX_MCLK is enabled. |
| RESERVED | Reserved, user software should not write ones to reserved bits. The value read from a reserved bit is not defined. |